solidian GRID as load-bearing reinforcement for structural designs
solidian GRID has received the general building approval (abZ) from the DIBt!
read more
Our value proposition to You
More times stronger than steel
Lightweight
-30% CO2 footprint
-50% less resources
Chemical resistant
EU
Product
Product
You are that next generation
read more
Composite applications
Production
Precision in every detail
As your EU-based partner with over 30 years of experience, we ensure precision in every detail of the production process.
read more
Our great projects start with your ideas
Projects
Anderten Lock
In this project, Anderten lock was repaired with non-metallic reinforcement.
The chambers were originally built as reinforced concrete walls with an inner brick lining. As a special feature, five levels of economizer basins are arranged one above the...
Read more
Projects
Monaco Energy Boat Challenge!
We are thrilled to share the remarkable achievement of the Rijeka-based team at the prestigious Monaco Energy Boat Challenge, organized by the Yacht Club de Monaco under the patronage of Prince Albert II. Members of the Association of Applied...
Read more
Projects
Northern main sewer in Leipzig
In this project, an old sewer was renovated with carbon concrete, significantly extending its service life. The reinforcement was supplied in rolls in our CARGO system for easy product handling. The roll with a width of 2.3 m had approx. 175...
Read more
Projects
PROeco eco-catamaran reinforced by kelteks
We are proud to support the PROeco eco-catamaran, a groundbreaking vessel partially made from natural, eco-friendly materials, including our Woven Roving Natural fabric, and powered by solar energy. This 19-meter long, 7.5-meter wide catamaran can...
Read more
Projects
Reinforcement for Ceramic Slabs
In collaboration with our partner Laminam S.p.A., we develop optimal solutions for reinforcing ceramic slabs. Combining our experience and expertise, we ensure the highest quality results.
Together, we tested various raw materials and ultimately...
Read more
Projects
Bruck/Mur junction
ASFINAG has successfully completed the complex renovation of the Bruck/Mur junction, which connects the S 6 Semmering expressway with the S 35 Brucker expressway. The project involved renewing the ramps, three water protection systems, four bridges...
Read more
Projects
Swimming pool reinforced with solidian ANTICRACK
Following water damage in a swimming pool, the subsequent restoration concept demanded stringent crack width limitation for the new floor slab. This requirement was effectively met using solidian ANTICRACK in a two-layer design.
To ensure precise...
Read more
Projects
Schwaderlocher Steg in Albbruck
After 84 years, the ERNE AG Bauunternehmung is renovating the dilapidated Schwaderlocher Steg in Albbruck this year. The challenge was that the paving slab could only have a thickness of 9 cm, a feat impossible with ordinary reinforced concrete....
Read more
Projects
Bürgerspital Solothurn
Horizontal and vertical elements are securely mounted in front of the windows, enclosing the entire building. The interplay between space and light was a crucial aspect of the façade design.
This project wouldn’t have been feasible with traditional...
Read more
Projects
Neviges pilgrimage cathedral
The pilgrimage cathedral in Neviges, opened in 1968, exemplifies the Brutalist architectural style. However, one drawback of the fair-faced concrete roof was its tendency to leak over time. An innovative solution that retains the character of this...
Read more
Projects
Electrical bicycle reinforced by kelteks
The Cadre Haut model from our partner Cyclik features joints reinforced with our kelteks Woven Roving natural. Cadre Haut is a pioneering eco-designed electric bike, compliant with European standards, made from natural materials such as bamboo and...
Read more
Projects
We are reinforcing the world with our glass fabric - kelteks Woven Roving Glass
Our kelteks Woven Roving Glass fabric is a key reinforcement component in the products crafted by our partner, Brianza Plastica SpA. With its unparalleled combination of lightweight durability and superior strength, it is the preferred choice for...
Read more
Projects
Boat reinforced by kelteks
In partnership with Branagh Marine Composites, we enhance the performance of lightweight boats using kelteks Unidirectional (UD) carbon fabric, enabling them to achieve exceptional speed and agility.
Our UD carbon fabric significantly increases the...
Read more
Projects
Road bridges in Albstadt-Pfeffingen/Margrethausen
In a significant advancement for civil engineering, the first two road bridges made of carbon concrete have been completed in Albstadt Margrethausen and Peffingen. These structures demonstrate the exceptional load-bearing capacity of carbon...
Read more
Projects
Pedestrian bridge Albstadt-Ebingen
The first bridge constructed entirely from pure carbon concrete has set a new standard in engineering. This innovative pedestrian bridge eliminates the need for reinforcing steel and prestressing, showcasing the potential of advanced materials.
Not...
Read more
Projects
Carolabridge in Dresden
The Carolabridge, a crucial artery in Dresden's city traffic network, had suffered significant wear and tear due to environmental influences and weathering, necessitating an extensive restoration. This project also included plans to widen the...
Read more
Projects
Pedestrian bridges in the Remstal
In 2019, the world's first integral wooden bridgefeaturing textile concrete was constructed. This innovative bridge combines wood and carbon concrete, showcasing the unique strengths of both materials. During the planning stage, the slimness and high...
Read more
Projects
Façade of Advancing Electronics Dresden Center
In 2018, the laboratory building of the Center for Advancing Electronics at the Technical University of Dresden underwent significant renovation, modernization, and expansion. As part of this project, a 198 m² artistic concrete façade was created using...
Read more
Projects
Underground parking garage Marquardtbau Stuttgart
In 2017, KNAAK+REICH project office was tasked with strengthening the structure of an underground car parkand protecting it from further corrosion. To minimize the load on the approximately 1,600 m² area, a lightweight solution was essential. The project...
Read more
Projects
Formula Student and Strohm und Söhne e.V.
We supported Strohm und Söhne e.V. with the supply of sandwich materials and glass fibers. This enabled the team to make progress towards lightweight engineering for their high-performance vehicle parts. Both materials have been used in the...
Read more
Get in touch
hr
Dr. Slavka Rozgaja 3
47000 Karlovac, Croatia - EU
+385 47 693 300
sales@solidian-kelteks.com
Dr. Slavka Rozgaja 3
47000 Karlovac, Croatia - EU
+385 47 693 300
sales@solidian-kelteks.com
de
Sigmaringer Straße 150
72458 Albstadt, Deutschland - EU
+49 74 3110 3135
info@solidian.com
Sigmaringer Straße 150
72458 Albstadt, Deutschland - EU
+49 74 3110 3135
info@solidian.com
tr
Cinarli Mah. Ozan Abay Cad. Ege Perla No:10/222 35170 Konak
İzmir, Turkiye
+90 530 818 1490
sales-turkiye@solidian-kelteks.com
Cinarli Mah. Ozan Abay Cad. Ege Perla No:10/222 35170 Konak
İzmir, Turkiye
+90 530 818 1490
sales-turkiye@solidian-kelteks.com
