Unmatched durability and cost-efficiency
REBAR carbon
En yüksek performans.
Çelik gibi ama daha iyi.
solidian REBAR karbon, beton yapılarda kullanılan korozif olmayan, yüksek mukavemetli, metalik olmayan bir takviye malzemesidir. Yüksek mukavemetli karbon fiberlerden üretilen inşaat demirlerimiz mükemmel gerilme mukavemeti, düşük ağırlık ve kimyasal ve çevresel bozulmaya karşı direnç sunar. Köprüler, tüneller veya deniz yapıları gibi kritik altyapı projeleri gibi zorlu ortamlarda kullanım için idealdir.
solidian REBAR karbon, mühendislerin beton yapıların ömrünü önemli ölçüde uzatmasına yardımcı olurken bakım maliyetlerini azaltır ve gelişmiş dayanıklılık ve performans yoluyla sürdürülebilirliği teşvik eder.
Product Features
solidian REBAR'lar paslanmaz ve çelikten daha yüksek mukavemetleri ile nesiller boyu sürecek telkari, zarif yapılara hayat verirler.
Donatı çubuklarımız, malzemenin korozyona dayanıklı veya hafif olması gereken her türlü yapısal veya mimari uygulamada kullanılabilir. Hangi kalınlıkta veya boyutta beton koruma kullanırsanız kullanın, çelik donatı korozyonu an meselesidir. Bu nedenle çelik takviyeli beton yapıların belirli bir süre sonra onarılması veya yıkılması gerekir. Karbon inşaat demirimiz ile bu sorun çözülmüştür ve bizim ve çocuklarımızın geleceği için daha sürdürülebilir bir beton yapı inşa etmenizi sağlayan bir dizi ek özelliğe sahiptir.
Bir bakışta tüm avantajlar
- Korozyona dayanıklıdır: Azaltılmış beton örtüsü, daha uzun hizmet ömrü, yapılar için daha düşük bakım maliyetleri
- Yüksek gerilme mukavemeti: Daha yüksek performans, daha düşük genel inşaat maliyetleri
- Düşük ağırlık: Daha düşük nakliye maliyetleri, daha kolay kullanım
- Sürdürülebilir ve kaynak tasarrufu: Azaltılmış kaynak kullanımı, yapıların daha uzun hizmet ömrü
- Klorür ve alkaliye dayanıklı: Minimum veya hiç onarım gereksinimi yok
- Diğer korozyona dayanıklı takviyelere göre daha iyi fiyat-performans oranı
Teknik Bilgiler
- Yüksek performanslı karbon fiberlerden yapılmış kompozit malzeme
- Karakteristik kısa süreli gerilme mukavemeti: ≥ 2000 N/mm²
- Mevcut çaplar: 4, 6, 8, 10 ve 12 mm
- Standart uzunluk: 6 m - 12 m'ye kadar mevcuttur
güçlendirmeler gelecek nesiller için
Reference project
Belediye Hastanesi Solothurn
Yeraltı Otoparkı Marquardtbau Stuttgart
Boğaz Köprüsü
Product Applications
Metalik olmayan donatı çubukları, yüksek performanslı donatıların gerekli olduğu ve klorür gibi agresif çevresel etkilerin mevcut olduğu tüm alanlarda kullanım için önceden belirlenmiştir.
- Köprü inşaatı
- Endüstriyel zeminler, park güverteleri veya araba yolları gibi beton plakalar
- Kanalizasyon tesisleri
- Deniz yapıları, hidrolik mühendislik yapıları
- Cepheler, balkonlar
- Tünel ve maden inşaatı
- Performance Enhancement
- Handling and Logistics
- Compliance and Compatibility
- Application and Installation
- Durability and Resistance
- Sustainability and Environmental Impact
- Is solidian GRID suitable for replacing corroded steel reinforcement?
- How does solidian GRID contribute to system durability when used with mortars?
- Can solidian GRID conform to curved surfaces during installation?
- How does the weight of solidian GRID affect transportation and installation?
- Is there an Environmental Product Declaration available for solidian GRID and solidian REBAR?
- Has solidian GRID received official building approvals?
- With which types of binders is solidian GRID compatible?
- Is solidian GRID approved for use in standard concrete applications?
- What is the minimum thickness required for concrete layers using solidian GRID?
- Can solidian GRID be used to reinforce existing concrete structures?
- What is the expected lifespan of solidian GRID in wastewater applications?
- How does solidian GRID perform in acidic environments?
- How does solidian GRID contribute to sustainable construction?
- Resource efficiency: By minimizing the need for extra concrete cover, solidian GRID conserves materials such as cement and aggregates, contributing to resource efficiency.
- Environmental Product Declarations (EPDs): solidian provides transparent data on the environmental impact of their products through EPDs, facilitating informed decision-making for sustainable building projects.
Solidian Kelteks - Reduced CO₂ emissions: The use of solidian GRID in construction can lead to significant reductions in CO₂ emissions due to decreased material usage and enhanced durability, which extends the lifespan of structures and reduces the need for repairs.
Sıkça sorulan sorular
Yes, in cases where steel reinforcement has corroded, solidian GRID can serve as a substitute for structural reinforcement. The existing corroded steel can remain in place and be covered with a new layer of carbon-reinforced mortar, restoring structural integrity.
When combined with high-quality mortars, solidian GRID significantly enhances the overall durability of the system, providing a robust solution for demanding environments.
Yes, solidian GRID strikes a balance between stiffness and flexibility, allowing it to be applied to curved surfaces with diameters greater than 800mm.
The lightweight nature of solidian GRID facilitates easy transportation, even through sewage tunnels, and simplifies the installation process, reducing labor and equipment requirements.
Yes, a certified Environmental Product Declaration (EPD) is available for both solidian GRID and solidian REBAR. The EPD provides transparent and verified information about the environmental impact of these products throughout their life cycle, supporting sustainability assessments in construction projects.
Yes, solidian GRID has obtained the General Building Approval (abZ) from the German Institute for Building Technology (DIBt). This approval authorizes its use as carbon reinforcement grids in construction, ensuring compliance with national building standards.
solidian GRID is versatile and works with a range of binders, including Portland Cement, Calcium Aluminate Cements, and Geopolymer Cements.
solidian GRID holds German Approval as reinforcement for EN 206 concretes, supporting its compatibility with various mortar systems, including those adhering to DIN 19573.
Concrete layers reinforced with solidian GRID can be as thin as 20mm, as no additional concrete cover is needed to protect the reinforcement from corrosion.
Yes, solidian GRID can be applied as an additional layer over existing steel-reinforced concrete. When combined with solidian ANTICRACK, it offers enhanced crack-limiting properties, providing extra protection to the underlying steel reinforcement.
Classified under XWW4, solidian GRID ensures long-term performance for over 50 years, making it a durable choice for long-term infrastructure projects.
solidian GRID is fully resistant to severe acidic conditions, including environments with pH levels as low as 0. It has successfully passed tests in accordance with DIN 19573 standards for pH 0 and pH 1.
solidian GRID enables the design of thinner concrete layers (greater than 20mm) without requiring additional concrete cover for reinforcement protection. This reduction in material usage leads to lower resource consumption and a diminished environmental footprint, supporting more sustainable construction practices.
Additional information:
