Primafas
The reinforcement mesh has a high tensile strength and low elongation to prevent the formation of cracks, and an alkali-resistant coating to protect the wall mesh while the render dries.
Primafas mesh prevents any potential crack creation and by that protects the whole system from water infiltration and mould development. The life time of ETICS is by that prolonged to maximum.
Certified by EAD 040016-01-0404.
Product Features
- E-Glass known for stable fabric quality
- Excellent mechanical properties
- Non-corrosive
- Flexible reinforcement
- In-house developed technique & technology
- In-house conditioning and testing
- Does not add significant weight or mass to the structure
- Easy installation procedure
- Easy to cut
Reference project
Bürgerspital Solothurn
Underground parking garage Marquardtbau Stuttgart
Bosporous bridge
Product Applications
Primafas is mandatory component for ETICS system!
1. Firstly, corner and window profiles should be correctly applied on the prepared surface. Then install the 30 × 50 cm mesh strips diagonally to avoid cracking.
2. Apply the first layer of base coat over the entire surface.
3. Apply the mesh from the top to the bottom of the wall by pressing it into the first layer of the base coat (starting from the centre then out to the side).
4. The overlap between the two mesh strips should be a minimum of 10 cm to ensure continuity of reinforcement.
5. Apply the rest of the base coat keeping the mesh in the upper third.
